Matlab parallel server

This document provides the steps to configure MATLAB to submit jobs to a cluster, retrieve results, and debug errors.

CONFIGURATION

After logging into the cluster, start MATLAB. Configure MATLAB to run parallel jobs on your cluster by calling configCluster.

>> configCluster

Jobs will now default to the cluster rather than submit to the local machine.

NOTE: If you would like to submit to the local machine then run the following command:

>> % Get a handle to the local resources
>> c = parcluster('local');

CONFIGURING JOBS

Prior to submitting the job, we can specify various parameters to pass to our jobs, such as queue, e-mail, walltime, etc.

>> % Get a handle to the cluster
>> c = parcluster;

>> % Specify a partition to use for MATLAB jobs. The default partition is batch.			
>> c.AdditionalProperties.QueueName = 'partition-name';

>> % Run time in hh:mm:ss
>> c.AdditionalProperties.WallTime = '05:00:00';

>> % Maximum memory required per CPU (in megabytes)
>> c.AdditionalProperties.MemUsage = '4000';

>> % Specify e-mail address to receive notifications about your job
>> c.AdditionalProperties.EmailAddress = 'user-id@company.com';

>> % If you have other SLURM directives to specify such as a reservation, use the command below:
>> c.AdditionalProperties.AdditionalSubmitArgs = '';

Save changes after modifying AdditionalProperties for the above changes to persist between MATLAB sessions.

>> c.saveProfile

To see the values of the current configuration options, display AdditionalProperties.

>> % To view current properties
>> c.AdditionalProperties

Unset a value when no longer needed.

>> % Turn off email notifications 
>> c.AdditionalProperties.EmailAddress = '';
>> c.saveProfile

INTERACTIVE JOBS

To run an interactive pool job on the cluster, continue to use parpool as you’ve done before.

>> % Get a handle to the cluster
>> c = parcluster;

>> % Open a pool of 64 workers on the cluster
>> p = c.parpool(64);

Rather than running local on the local machine, the pool can now run across multiple nodes on the cluster.

>> % Run a parfor over 1000 iterations
>> parfor idx = 1:1000
      a(idx) = …
   end

Once we’re done with the pool, delete it.

>> % Delete the pool
>> p.delete

INDEPENDENT BATCH JOB

Rather than running interactively, use the batch command to submit asynchronous jobs to the cluster. The batch command will return a job object which is used to access the output of the submitted job. See the MATLAB documentation for more help on batch.

>> % Get a handle to the cluster
>> c = parcluster;

>> % Submit job to query where MATLAB is running on the cluster
>> j = c.batch(@pwd, 1, {});

>> % Query job for state
>> j.State

>> % If state is finished, fetch the results
>> j.fetchOutputs{:}

>> % Delete the job after results are no longer needed
>> j.delete

To retrieve a list of currently running or completed jobs, call parcluster to retrieve the cluster object. The cluster object stores an array of jobs that were run, are running, or are queued to run. This allows us to fetch the results of completed jobs. Retrieve and view the list of jobs as shown below.

>> c = parcluster;
>> jobs = c.Jobs;

Once we’ve identified the job we want, we can retrieve the results as we’ve done previously. fetchOutputs is used to retrieve function output arguments; if calling batch with a script, use load instead. Data that has been written to files on the cluster needs be retrieved directly from the file system (e.g. via ftp). To view results of a previously completed job:

>> % Get a handle to the job with ID 2
>> j2 = c.Jobs(2);

NOTE: You can view a list of your jobs, as well as their IDs, using the above c.Jobs command.

>> % Fetch results for job with ID 2
>> j2.fetchOutputs{:}

PARALLEL BATCH JOB

Users can also submit parallel workflows with the batch command. Let’s use the following example for a parallel job ‘parallel_example.m’.

function t = parallel_example(iter)
if nargin==0, iter = 16; end
disp('Start sim')

t0 = tic;
parfor idx = 1:iter
    A(idx) = idx;
    pause(2)
end
t = toc(t0);

disp('Sim completed.')

This time when we use the batch command, in order to run a parallel job, we’ll also specify a MATLAB Pool.

>> % Get a handle to the cluster
>> c = parcluster;

>> % Submit a batch pool job using 4 workers for 16 simulations
>> j = c.batch(@parallel_example, 1, {}, 'Pool',4);

>> % View current job status
>> j.State

>> % Fetch the results after a finished state is retrieved
>> j.fetchOutputs{:}
ans = 
	8.8872

The job ran in 8.89 seconds using four workers. Note that these jobs will always request N+1 CPU cores, since one worker is required to manage the batch job and pool of workers. For example, a job that needs eight workers will consume nine CPU cores. We’ll run the same simulation but increase the Pool size. This time, to retrieve the results later, we’ll keep track of the job ID. NOTE: For some applications, there will be a diminishing return when allocating too many workers, as the overhead may exceed computation time.

>> % Get a handle to the cluster
>> c = parcluster;

>> % Submit a batch pool job using 8 workers for 16 simulations
>> j = c.batch(@parallel_example, 1, {}, 'Pool', 8);

>> % Get the job ID
>> id = j.ID
id =
	4
>> % Clear j from workspace (as though we quit MATLAB)
>> clear j

Once we have a handle to the cluster, we’ll call the findJob method to search for the job with the specified job ID.

>> % Get a handle to the cluster
>> c = parcluster;

>> % Find the old job
>> j = c.findJob('ID', 4);

>> % Retrieve the state of the job
>> j.State
ans
finished
>> % Fetch the results
>> j.fetchOutputs{:};
ans = 
4.7270

The job now runs in 4.73 seconds using eight workers. Run code with different number of workers to determine the ideal number to use. Alternatively, to retrieve job results via a graphical user interface, use the Job Monitor (Parallel > Monitor Jobs).

DEBUGGING

If a serial job produces an error, call the getDebugLog method to view the error log file. When submitting independent jobs, with multiple tasks, specify the task number.

>> c.getDebugLog(j.Tasks(3))

For Pool jobs, only specify the job object.

>> c.getDebugLog(j)

When troubleshooting a job, the cluster admin may request the scheduler ID of the job. This can be derived by calling schedID

>> schedID(j)
ans
25539

Updated: